Three-sided tippers
Tipper type KS 160
For truck chassis from 18.001 – 26.000 kg
Technical data:
| KS 160 | | 4.500 mm | 4.800 mm | 5.000 mm | 5.200 mm |
|---|
| body length |
mm |
4.500 |
4.800 |
5.000 |
5.200 |
| weidth |
mm |
2.300 |
2.300 |
2.300 |
2.300 |
| height side board / rear board |
mm |
850 |
850 |
850 |
850 |
| volume |
m³ |
≈ 8,7 |
9,4 |
9,8 |
10,2 |
| weight |
kg |
≈ 2.700 |
≈ 2.800 |
≈ 2.950 |
≈ 3.120 |
Standard equipment:
- for truck chassis equipped with a PTO
- number of axles: 3type: three sided tipper
- technical load capacity: cca. 15.500 kg
- height of the front wall: 1.000 mm
- the material of the front wall and the thickness: St 52 / 3 mm
- the material of the side / rear board and the thickness: St 52 / 3 mm
- side board: singled one piece
- the opening of the side boards: deflection
- the opening of the back board: deflection (automatic)
- floor material and the thickness: HARDOX 400 / 5 mm
- the system raising of the tipper: centrally located telescopic hydraulic cylinder
- complete hydraulics
- drive hydraulic pumps over power outputs from vehicles (PTO)
- control - tipping load: valve (joystick) in the cabin located laterally to the driver's seat
- steel parts are sandblasted and painted twice
- subframe painted in the color of the vehicle
- tipper body painted in monochrome color of the vehicle cab or customer specification
- side underrun protection according to CE standards
- mudguards on the rear wheels
- electrical installations
- outline marker lights
- atest from the Center for vehicles Republic of Croatia
Additional equipment at extra charge:
- excerpt from the transmission from the truck chassis, with installation, depending on the type of truck chassis and transmission
- installation of hydraulics for tipper trailer
- toolbox with carriers
- material / floor thickness: HARDOX 400 – 6 mm
- the material of the side / rear board and the thickness 4 mm
- double opening of the rear wall, flap / deflection (manual)
- double opening of the singled side boards, deflection/ flap with spring set
- double side boards, opened by deflection
- double opening of the two-part side boards, deflection / flap
- demountable middle pillars at doubled side boards
- steel side walls height 1.000 mm / front wall 1.200 mm
- steel side walls height 1.100 mm / front wall 1.300 mm
- aluminum side and rear walls height 900 mm, profile 75 / 60 / front steel wall height 1.100 mm
- aluminum side and rear walls height 1.000 mm, profile 75 / 60 / front steel wall height 1.200 mm
- Bordmatic, hydraulic board opening on one side of the single one-pieced side boards, for board height 850 mm
- Bordmatic, hydraulic board opening on one side of the single one-pieced side boards, for board height 1.100 mm
- installation of hydraulics for tipper trailer with Bordmatic
- performance pallet width of the tipper 2.420 mm
- spare wheel carrier
- spare wheel carrier, lying under the subframe of the tipper
- extension for unloading asphalt 300 mm (demontable)
- tarpaulin cover for asphalt, with no mechanism (heat resistant)
- tarpaulin cover with mechanism (normal)
- folding rear underrun protection, especially for truck chassis intended for loading asphalt in the finisher
