Towing vehicles

With a slidable platform

With sliding platform KP–20

Installation on the vehicle total weight minimum 6,000 kg
Load capacity approximately 2,500 kg
Dimensions of the platform approximately 5.500 × 2.300 mm
Platform is made of sheet steel
Construction and subframe made of steel profiles
Hydraulic lifting/ lowering platform
Hydraulic sliding platform
Slipways angle 11 - 13 °
Auxiliary hydraulic stabilizers on the rear of the chassis
Hydraulic winch WARN Series 9
Traction force on the first coil 4.500 kg
Steel cable with a diameter of 10 mm, length 25 m Hook
Speed traction app 11 m / min
Mounting the winch on the front of the landing
Manually operated winch
Mats to block the vehicle on the platform
Hydraulic control block laterally from the right side
Control handles - placed in command chest
On the front wall of the upgrade a hook type ball
On the back wall of the body hook type ball
Mudguards
Tool box with carriers
Side underrun protection according to CE standards
Work reflector on the fence behind the cab
2 × yellow rotation light on the cab roof
Hydraulic pump, oil tank and complete hydraulic installations
Sandblasting all steel parts and a double coating in the color according to customer preferce

NOTE: The telescopic crane, fork or hydraulic traction set is determined for each vehicle, at least the total weight of the vehicle 7,500 kg.

Dimensions the sliding part of the platform approximately 6,000 × 2,400 mm
Side fence of round steel tubes 150 mm height
The entire platform is sliding and tilting lowered hydraulically on the ground
Slipways maximum angle 10-140
Front protective fence
Controling the platforms slope and sliding - handles on the manifold
Auxiliary hydraulic stabilizers
Mounting on the rear overhang
Provides vehicle stability when landfill
Hydraulic steering - manually
Load capacity on the landing approximately 4000 kg
Hydraulic winch WARN serije 9
- A traction force on the first coil 4.100 kg
- Steel cable with a diameter of 11 mm, length 25 m with hook
- Speed traction approximately 9.5 to 13.5 m / min
- Radio remote controls
- Mounting at the front protective site
- Hydraulic lateral movements of the winch
Mats to block the vehicle on the platform
Mudguards
Tool box with carriers
Work reflector on the fence behind the cab - agile
4 rings for binding
Compact lighted armature 1,200 mm _two rotations, the central part of the fluorescent sign
Platform is made of sheet steel
Construction and subframe made of steel profiles
Hydraulic control block laterally from the right side
Side underrun protection according to CE standards
Hydraulic pump, oil tank and complete hydraulic installations
Sandblasting all steel parts and a double coating in the color according to customer preference
Certificate of the Centre for Croatian vehicles

Mounting monitor and two cameras to control the landing and maneuvering
Sound signalization when moving the vehicle reverse
Centrally located lifting crane for pulling, lifting power on 3.5 m - 2,000 kg, 5.5 m - 1,200 kg, Pulley at the top of the crane, the maximum angle of lifting 450
Hook - ball - on the the back side
Additional toolbox
Canister for water 10 l with holder
Additional reflector rotating, on the fence
4 PE belts with pre-tensioners for securing cargo
Remote Radio control of the entire platform, with 4 functions
Towing lever
Holder for motorcycles with belt tensioners on the landing
Hydraulic towing fork __
Jack 12 V at the end of the chassis
Extra pulley
Protective cover for winch
Special cover, elastic, to cover vehicles on the platform, with the fastening points on the platform with elastic tensioners

NOTE: The telescopic crane, fork or hydraulic traction set is determined for each vehicle, at least the total weight of the vehicle 7,500 kg.