Three-sided tippers

Tipper type KS 60

For truck chassis from 10.001 – 15.000 kg

KS 60		3.600 mm	4.000 mm	4.400 mm
body length	mm	3.600	4.000	4.400
weidth	mm	2.300	2.300	2.300
height side board/rear board	mm	500	500	500
volume	m³	≈ 4,1	≈ 4,6	≈ 5
weight	kg	≈ 1.420	≈ 1.490	≈ 1.590

for truck chassis equipped with a PTO
number of axles: 2
type: three sided tipper
technical load capacity: cca. 7.600 kg
height of the front wall: 800 mm
the material of the front wall and the thickness: St 52 / 2,5 mm
the material of the side / rear board and the thickness: St 52 / 2,5 mm
side board: singled one piece
the opening of the side boards: flap
the opening of the back board: deflection (automatic)
floor material and the thickness: HARDOX 400 / 4 mm
the system raising of the tipper: centrally located telescopic hydraulic cylinder
complete hydraulics
drive hydraulic pumps over power outputs from vehicles (PTO)
control - tipping load: valve (joystick) in the cabin located laterally to the driver's seat
steel parts are sandblasted and painted twice
subframe painted in the color of the vehicle
tipper body painted in monochrome color of the vehicle cab or customer specification
side underrun protection according to CE standards
mudguards on the rear wheels
electrical installations
outline marker lights
atest from the Center for vehicles Republic of Croatia

excerpt from the transmission from the truck chassis, with installation, depending on the type of truck chassis and transmission
installation of hydraulics for tipper trailer
toolbox with carriers
material / floor thickness: HARDOX 400 – 5 mm
double opening of the rear wall, flap / deflection (manual)
double opening of the rear wall, flap / deflection with spring set
steel side walls height 600 mm/front wall 900 mm
aluminum side and rear walls height 500 mm / front steel wall height 800 mm
aluminum side and rear walls height 600 mm / front steel wall height 900 mm
elevated side walls (removable, mesh + 400 mm)
spare wheel carrier
performance pallet width of the tipper 2.420 mm