HK English
tel +385 49 587 900
Working platforms

Telescopic working platforms

Hydraulic telescopic working platforms type - HT-13, HT-17, HT-21 working heights of 13, 17 and 21 meters are designed according to the experience of users, and the applicable technical standards, including CE standards.

Purpose: work at heights.
Application: HT-13 and the vehicles of category B; HT-17 and HT-21 on the vehicles C categories.
Drive: hydraulic from power outputs from transmission vehicles.
Control: electro-hydraulic from dome and working platforms.
Backup power: Manual; stabilizers pullable with drawn control

Hydromechanical proportional control of the speed and agility of the platform. Starting and stopping the engine from the platform.

Turret Rotation : infinit (360 × n)

Levelling of the platform: hydraulic cylinders with spillover

Group and individual operational stabilizers. Breaker doubled border position lever. Sound signals in the border positions. Switched off possibility to operate the platform when the vehicle is not in a stable position. Driving width and height are adapted to urban conditions (narrow streets, low pass).

Permitted load of the working platforms depends on the mass of the vehicle and the type of platform: the amounts 120-280 dN (kg).

Options:

  • independent electric hydraulic drive single or three phase power supply (220- 380V),
  • independent motor-driven device for extra-fast movement of the increasing number of speed with the platform.

Accessories by the user if it allows the payload. Maintenance is simple, the service is secured. The working parts, hydraulic components, and electric devices are available. Installations are protected from mechanical and weather conditions. The degree of protection of electrical equipment - IP 65th

DIJAGRAM HT-13.pdf

Objavljeno 100.65 KB

DIJAGRAM HT-17__ ALM sustav.pdf

Objavljeno 240.86 KB

DIJAGRAM HT-21__ ALM sustav.pdf

Objavljeno 269.25 KB

HT-13

For truck chassis total weight GVW 3.500 kg or more (single cabin 1 + 1, single rear wheels), wheelbase 3,750 mm, driving vehicle category B Axles 2 Type of hydraulic platform - telescopic Working height of the platform 13.0 m Maximum lateral outreach up to 8.5 m Drive hydraulic platform with power outputs from from the gearboxof the vehicle Handling of the platform electro-hydraulic, proportionally,

Read more

HT–17

For truck chassis total weight of 5,000 kg or more (single cabin 1 + 1, dual rear wheels), wheelbase 3,750 mm, driving Vehicle category C Axles 2 Type - telescopic Working platform height 17.0 m Maximum lateral outreach up to 11.6 m with the ALM system Maximum lateral outreach with 200 kilograms in the working basket to 8.0 m with the ALM system ALM system: automatic torque limiting (to automatically

Read more

HT–21

For truck chassis total weight of 5,000 kg or more (single cabin 1 + 1, dual rear wheels), wheelbase 3,750 mm, driving Vehicle category C Axles chassis 2 Type - telescopic Working platform height 21.0 m Maximum lateral outreach up to 11.6 m with the ALM system Maximum lateral outreach with 200 kilograms in the working basket to 8.0 m with the ALM system ALM system: automatic torque limiting (to automatically

Read more